The Dallas Cowboys Helmet Hitch Cover, item # HHCC2008, measurement from the top of the shank to the top of the cover is 15/16 inches, see photo at right.
I went out to the warehouse and pulled each of the Dallas Cowboys hitch covers, see link, and measured them. The hitch cover with the shortest dimension from the top of the 2 inch hitch receiver opening to the top of the cover is the Dallas Cowboys Star Hitch Cover, item # NHC108. The measurement from the top of the shank to the top... view full answer...
Most of the hitch plugs and hitch covers are designed that the plug or the shank on the hitch cover will slide into the inside of the hitch receiver. The lip on the end of the hitch should not interfere with installing the correct 1-1/4 inch size hitch cover on your 2007 Ford Explorer.
The rubber hitch plugs, like the Draw-Tite Rubber 1-1/4 Inch Tube Cover, # 2211, will just push into the opening and does not require a pin to hold it in place.
The hitch covers that use a shank like the... view full answer...
I do have a VFW hitch cover for you like the VFW Seal Trailer Hitch Receiver Cover part # AMG102422 but the emblem does not come separate from the cover. This is the only VFW branded logo we offer. You can protect the hitch cover from theft by using the Trailer Hitch Receiver Lock part # e98880. view full answer...
After checking the dimensions of the Hensley BD3 and comparing them to the Reese 5th Wheel Trailer Hitch Cover, # RP30055, I have come to the conclusion that the cover should fit. The cover itself is designed to fit around the head of the hitch. The cover is 8 inches deep and judging from pictures of your hitch I found online, the straps should be able to go around the hitch body to secure the cover to the hitch head. view full answer...
I have a solution for you, but the only 2-1/2 inch hitch cover that we carry is Curt Rubber Hitch Cover part # C22277.
You can use the Curt Reducer Sleeve part # C45405 to use a 2 inch Georgia Bulldogs hitch cover like part # CTH5S. view full answer...
We do not have any hitch covers made for 3" hitches. In fact there is only one hitch cover made for 2-1/2" hitch receivers which is the Curt Hitch Cover # C22277.
Having a 3" hitch receiver limits your options whenever you want to use it for non-towing purposes. If ever you want to carry around a bike rack or use a non-towing accessory, I recommend having the Curt Hitch Reducer Sleeve # C45408. It's a small adapter that fits inside your hitch so that you can use normal 2" hitch accessories... view full answer...
It sounds like you have a 1-1/4" hitch receiver on the Mercury Mountaineer. You need a hitch cover that fits 1-1/4" hitch receivers like part # AUT2-MRY-C that you referenced. There is not an adapter available to make the 2" hitch cover fit the 1-1/4" hitch.
I also recommend to use a Anti-Rattle Lock part # SHP2082 to lock the hitch cover into the hitch. view full answer...
The Reese 5th Wheel Trailer Hitch Cover # RP30055 should have no problem fitting the head of your Curt 20K Fifth Wheel Hitch.
The only fifth wheel hitches this cover doesn't fit are the ones that have larger heads like the Elite hitches. The Curt 20K Hitch has a smaller head so this would work just fine.
Another option would be the Classic Accessories Cover, part # CA80116. This cover also fits just fine over a 20K fifth wheel trailer hitch. view full answer...
5th wheel hitch cover # RP30055 should just fit your Draw-Tite 5th wheel hitch. The side to side measurement is 28 inches on the cover but since your hitch is 14 inches front to back there will be enough slack to compensate for that 1 inch difference between the cover's width and the hitch's width. view full answer...
To determine if the Harley-Davidson hitch cover # HDHC14 will clear the bumper on your 2015 GMC Canyon you will need to measure from the center of the hitch pin hole back to the distance needed to clear the rear bumper.
The hitch cover has 2 pin hole. The first one is 1-15/16 inches from the back of the cover. The second is 2-7/8 inches from the back of the cover. If your measurement is less than either of these measurements the cover will fit without making contact with the bumper.
The... view full answer...
If your Ford F-250 Super Duty has a 2 inch by 2 inch trailer hitch receiver opening then the State of Texas Chrome Emblem Hitch Cover, # AMGSTTXC, will fit. All you will need is a hitch pin to secure it in place. I recommend a locking hitch pin like Trailer Hitch Receiver Lock, # e98880, to deter theft of the hitch cover.
Most F-250 pickups come with a 2 inch hitch, but some might have a 2-1/2 inch receiver opening. If you measure and find that you have a 2-1/2 inch opening, you can use... view full answer...
The Reese 5th Wheel Trailer Hitch Cover, # RP30055, will fit a 15k hitch and a 20k hitch, so there should not be any fit issue with a 16k hitch. To verify, you can take some measurements and compare them to the cover which measures 18 inches long and 28 inches across. The cover is designed to cover the hitch head and not necessarily the base or legs. Take a look at the third and fourth pictures on the product page. view full answer...
The North Carolina hitch cover # CTH9S is designed to fit in 2 inch hitch openings. This will fit the hitch on your 2011 Jeep Wrangler Unlimited which has a 2 inch hitch. The cover also comes with some foam pads that will eliminate rattle between the cover and the hitch. The cover can be held in with a regular hitch pin and clip but to deter theft I recommend a locking hitch pin, # e98880. view full answer...
If you have a 2-inch trailer hitch on your 2012 Toyota Tacoma the New England Patriots Helmet NFL Trailer Hitch Cover, part # HHCC2018, will fit your vehicle.
The # HHCC2018 hitch cover, will fit on any 2-inch trailer hitch. The hitch cover will slide into the receiver hitch and the hitch pin is inserted through the holes in the hitch cover to hold it in place.
If you are wanting to lock the hitch cover to your hitch you can use Deadbolt Hitch Receiver Lock, part # 7683.
I am including... view full answer...
The cover over the seal does stay on the US Navy Seal Trailer Hitch Receiver Cover # AMG102397.
Also, if you need a hitch pin for this cover use the Trailer Hitch Pin and Clip # TMX33VR. view full answer...
Yes, the Classic Accessories Cover for 5th Wheel Trailer Hitch, # CA80116 will work with your Curt A30 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package, # C16070. This is not intended to be installed while driving.
Another option is the Reese 5th Wheel Trailer Hitch Cover, # RP30055 that is 18" x 28" and covers the hitch head only. This can be better made to cover and stay in place while driving. view full answer...
Good news, I can help you find an Ohio State University hitch cover that will fit your husbands 1-1/4 inch hitch on his 2013 Chevrolet Equinox.
There is one hitch cover that will be compatible with the 1-1/4 inch hitch, # CHC322L. The hitch cover is made by Siskiyou and the great thing it is it will include the 2 inch as well as the 1-1/4 inch brackets for the different sized hitches.
To secure either of these hitch covers into the hitch though you will need a pin and clip like # PC2... view full answer...
A New England winter can indeed be tough on any exposed metal. An anti-corrosive zinc plating, or full zinc construction, will help protect metal items like hitch covers that are exposed to the elements. Or you can choose a cover that is made of non-corrosive materials, like the New England Patriots Logo Trailer Hitch Cover # FTHB120S that is made of pewter and aluminum (no metallic zinc plating needed). This cover fits 2-inch hitches.
I have linked our main page for hitch covers. view full answer...
For the B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000 lbs # BWRVK3600 we don't have a specific cover from the manufacturer. We do have the Classic Accessories Cover for 5th Wheel Trailer Hitch - 24" x 24" x 18" - Black # CA80116 which will cover the hitch in the manner shown in the attached photo or the Reese 5th Wheel Trailer Hitch Cover # RP30055. I've attached a photo of a low profile companion with that cover to assist.
Unfortunately we don't... view full answer...
There isn't a cover specifically for the B&W Companion 5th wheel trailer hitches. You would have to go by the measurements of the covers we have to determine fit. Cover # RP30055 measures 18 inches by 38 inches.
Cover # CA80116 measures 24 x 24 x 18 inches.
Cover # DM14844 is designed specifically for Demco hitches and would not be a good match.
One of the other 2 covers could work but may not provide the best fit and would not cover the entire hitch. view full answer...
Go To Results